Connect with us

Biotech

Earliest Evidence of Humans Decorating Jewellery in Eurasia

Published

on

Upon their dispersals in Central and Western Europe by around 42,000 years ago, groups of Homo sapiens started to manipulate mammoth tusks for the production of pendants and mobiliary objects, like carved statuettes, at times decorated with geometric motifs. In addition to lines, crosses and hashtags, a new type of decoration – the alignment of punctuations – appeared in some ornaments in south-western France and figurines in Swabian Jura in Germany. Until now, most of these adornments were discovered from older excavations, and their chronological attributions remain uncertain. Hence, questions regarding the emergence of human body augmentation and the diffusion of mobiliary art in Europe remained strongly debated.

Upon their dispersals in Central and Western Europe by around 42,000 years ago, groups of Homo sapiens started to manipulate mammoth tusks for the production of pendants and mobiliary objects, like carved statuettes, at times decorated with geometric motifs. In addition to lines, crosses and hashtags, a new type of decoration – the alignment of punctuations – appeared in some ornaments in south-western France and figurines in Swabian Jura in Germany. Until now, most of these adornments were discovered from older excavations, and their chronological attributions remain uncertain. Hence, questions regarding the emergence of human body augmentation and the diffusion of mobiliary art in Europe remained strongly debated.

A new study, led by researchers of the Max Planck Institute for Evolutionary Anthropology in Germany, the University of Bologna in Italy, Wroclaw University in Poland, the Polish Geological Institute-National Research Institute, Warsaw, Poland, and the Institute of Systematics and Evolution of Animals Polish Academy of Sciences, reports the oldest known punctate ivory pendant found in Eurasia. Its age of 41,500 years places this personal ornament from Stajnia Cave within the record of the earliest dispersals of Homo sapiens in Europe.

Methodological advances in radiocarbon dating

“Determining the exact age of this jewellery was fundamental for its cultural attribution, and we are thrilled of the result. This work demonstrates that using the most recent methodological advances in the radiocarbon method enables us to minimise the amount of sampling and achieve highly precise dates with a very small error range. If we want to seriously solve the debate on when mobiliary art emerged in Palaeolithic groups, we need to radiocarbon date these ornaments, especially those found during past fieldwork or in complex stratigraphic sequences”, says Sahra Talamo, lead author of the study and director of the BRAVHO radiocarbon lab at the Department of Chemistry G. Ciamician of Bologna University.

The study of the pendant and the awl was also carried out through digital methodologies starting from the micro-tomographic scans of the finds. “Through 3D modeling techniques, the finds were virtually reconstructed and the pendant appropriately restored, allowing detailed measurements and supporting the description of the decorations,” notes co-author Stefano Benazzi, director of the Osteoarchaeology and Paleoanthropology Laboratory (BONES Lab) at the Department of Cultural Heritage, University of Bologna.

The personal ornament was discovered in 2010 during fieldwork directed by co-author Mikolaj Urbanowski among animal bones and a few Upper Palaeolithic stone tools. Separate short term occupations by Neanderthals and Homo sapiens groups have been identified from the cave’s archaeological record. The disposal of the pendant is probably occurred duringa hunting expedition into the Krakow-Czestochowa Upland where the pendant broke and was left behind in the cave.

Similar decorations appeared independently across Europe

“This piece of jewellery shows the great creativity and extraordinary manual skills of members of the group of Homo sapiens that occupied the site. The thickness of the plate is about 3.7 millimetres showing an astonishing precision on carving the punctures and the two holes for wearing it”, says co-author Wioletta Nowaczewska of Wroclaw University. “If the Stajnia pendant’s looping curve indicates a lunar analemma or kill scores will remain an open question. However, it is fascinating that similar decorations appeared independently across Europe”, remarks co-author Adam Nadachowski from the Institute of Systematics and Evolution of Animals Polish Academy of Sciences.

In broad-scale scenarios on the earliest expansion of Homo sapiens in Europe, the territory of Poland is often excluded suggesting that it remained deserted for several millennia after the demise of Neanderthals. “The ages of the ivory pendant and the bone awl found at Stajnia Cave finally demonstrate that the dispersal of Homo sapiens in Poland took place as early as in Central and Western Europe. This remarkable result will change the perspective on how adaptable these early groups were and call into question the monocentric model of diffusion of the artistic innovation in the Aurignacian”, says co-athor Andrea Picin from the Max Planck Institute for Evolutionary Anthropology in Leipzig.

Further detailed analyses on the ivory assemblages of Stajnia Cave and other sites in Poland are currently underway and promise to yield more insights into the strategies of production of personal ornaments in Central-Eastern Europe.

Feedzy

Article: bioengineer.org

Biotech

Are Researchers One Step Closer to Developing the Theory of Impulse Circuits?

Published

on

Computers play an important role in many aspects of life today. Digital computers are the most widely used, while quantum computers are well known. However, the least known computers are the so-called Stochastic Pulse Computers. Their work is based on highly parallel logical operations between trains of electrical pulses, where the pulses occur at random times, as in neurons, the nerve cells in the brains of humans and mammals.

Computers play an important role in many aspects of life today. Digital computers are the most widely used, while quantum computers are well known. However, the least known computers are the so-called Stochastic Pulse Computers. Their work is based on highly parallel logical operations between trains of electrical pulses, where the pulses occur at random times, as in neurons, the nerve cells in the brains of humans and mammals.

The main motivation for the growing interest in research on RPC computers over the past decade is the hope that they could solve faster and with less energy consumption tasks that are normally easy for living beings, but difficult for digital computers, such as instantaneous responses to stimuli, pattern recognition, robustness to errors and damage in the system, learning, and autonomy.

In a recent study published in Scientific Reports, researchers from the Croatian Centre of Excellence for Advanced Materials and Sensors, Dr Mario Stipčević of the Ruđer Bošković Institute (RBI) and Mateja Batelić, a student at the Faculty of Science at the University of Zagreb (FS), Croatia, describe new or improved versions of RPC circuits that use quantum randomness for the first time, but also go a significant step further and lay the first foundation for RPC circuit theory.

Namely, while circuits for processing information in a digital computer can be assembled from logic circuits as building blocks based on the well-known Boolean theory, a similar theory for RPC circuits does not yet exist. Therefore, the synthesis of circuits for an RPC is limited to trial and error through experimentation or simulation.

‘’The central part of our paper is the formulation and proof of the so-called entropy budget theorem, which can be used to easily verify whether a given mathematical (or logical) operation can be performed or “calculated” by any physical circuit, and if so, how much excess entropy must be available to a circuit in order to perform the given operation.

In this paper, we demonstrate the theorem using several examples of mathematical operations. Perhaps the most interesting proof is the existence of a deterministic half-sum circuit (a + b) / 2. However, this circuit is not yet known, and finding it is a challenge for further research,” says Mario Stipčević, head of the Laboratory of Photonics and Quantum Optics at the Ruđer Bošković Institute.

Feedzy

Source: bioengineer.org

Continue Reading

Biotech

PSMA PET Validates EAU Classification System to Determine Risk of Prostate Cancer Recurrence

Published

on

Reston, VA (January 20, 2022)—New research has confirmed the accuracy of the novel European Association of Urology (EAU) risk classification system that groups prostate cancer patients based on their risk of recurrence. Prostate-specific membrane antigen (PSMA) PET imaging of men with prostate cancer validated the EAU groupings and provided insights that could further refine risk assessment for patients. This study was published in the January issue of The Journal of Nuclear Medicine.

Credit: Justin Ferdinandus, Wolfgang P. Fendler, Andrea Farolfi, et al.

Reston, VA (January 20, 2022)—New research has confirmed the accuracy of the novel European Association of Urology (EAU) risk classification system that groups prostate cancer patients based on their risk of recurrence. Prostate-specific membrane antigen (PSMA) PET imaging of men with prostate cancer validated the EAU groupings and provided insights that could further refine risk assessment for patients. This study was published in the January issue of The Journal of Nuclear Medicine.

The diagnostic workup of prostate cancer has changed rapidly over the past few years. Recently, the EAU introduced a clinical system separating patients with rising PSA values after first-line therapy (prostate surgery or radiation) into groups of those with high risk and those with low risk for development of metastases. Shortly after this, the U.S. Food and Drug Administration approved 68Ga-PSMA-11 as the first PET drug to target the PSMA for men with prostate cancer.

“Given the growing availability of PSMA-directed PET imaging, our study sought to assess disease in patients based on the EAU classifications while using PSMA PET to identify subgroups of patients, such as those with undetectable, locoregional or distant metastatic disease,” said Justin Ferdinandus, MD, nuclear medicine physician at University Hospital in Essen, Germany.

The multicenter, international study analyzed PSMA PET scans of nearly 2,000 patients with prostate cancer and rising PSA levels. Patterns of disease spread on PSMA PET imaging were used to classify prostate cancer patients into both low- and high-risk groups. High-risk groups were found to have higher rates of metastatic disease on PSMA PET compared to low-risk groups. However, PSMA PET also found metastatic disease in low-risk and no disease in high-risk patients.

“Our study underscores the utility of the EAU risk groups to determine risk of metastasis in biochemically recurrent prostate cancer. But not every high-risk patient has metastases and not every low-risk patient has locoregional or no disease,” said Wolfgang Fendler, MD, nuclear medicine physician at University Hospital in Essen.

He continued, “The ultimate aim of imaging is to provide the right treatment for each patient. As evidenced in this research, the accuracy of PSMA PET is essential to improve stratification and potentially outcomes both in low-risk and high-risk settings.” 

The authors of “PSMA PET validates higher rates of metastatic disease for European Association of Urology Biochemical Recurrence Risk Groups: an international multicenter study” include Justin Ferdinandus, Department of Nuclear Medicine, University of Duisburg-Essen and German Cancer Consortium (DKTK)-University Hospital Essen, Essen, Germany; Wolfgang P. Fendler and Ken Hermann, Department of Nuclear Medicine, University of Duisburg-Essen and German Cancer Consortium (DKTK)-University Hospital Essen, Essen, Germany, and Ahmanson Translational Imaging Division, Department of Molecular and Medical Pharmacology, University of California Los Angeles, Los Angeles, California; Andrea Farolfi, Department of Nuclear Medicine, University of Duisburg-Essen and German Cancer Consortium (DKTK)-University Hospital Essen, Essen, Germany, and Division of Nuclear Medicine, IRCCS Azienda Ospedaliero-Universitaria di Bologna, Bologna, Italy; Samuel Washington, Department of Urology, University of California San Francisco, San Francisco, California, and Department of Epidemiology and Statistics, University of California San Francisco, San Francisco, California; Osama Mohamad, Department of Radiation Oncology, University of California San Francisco, San Francisco, California; Miguel H. Pampaloni and Thomas A. Hope, Department of Radiology and Biomedical Imaging, University of California San Francisco, San Francisco, California; Peter J.H. Scott, Melissa Rodnick, Benjamin L. Viglianti and Morand Piert, Department of Radiology, University of Michigan, Ann Arbor, Michigan; Matthias Eiber, Department of Nuclear Medicine, Klinikum rechts der Isar, Technical University Munich, Munich, Germany; and Johannes Czernin, Wesley R. Armstrong and Jeremie Calais, Ahmanson Translational Imaging Division, Department of Molecular and Medical Pharmacology, University of California Los Angeles, Los Angeles, California.

Visit JNM’s new website for the latest research, and follow our new Twitter and Facebook pages @JournalofNucMed.

###

Please visit the SNMMI Media Center for more information about molecular imaging and precision imaging. To schedule an interview with the researchers, please contact Rebecca Maxey at (703) 652-6772 or [email protected].
 

About JNM and the Society of Nuclear Medicine and Molecular Imaging
The Journal of Nuclear Medicine (JNM) is the world’s leading nuclear medicine, molecular imaging and theranostics journal, accessed more than 13 million times each year by practitioners around the globe, providing them with the information they need to advance this rapidly expanding field. Current and past issues of The Journal of Nuclear Medicine can be found online at http://jnm.snmjournals.org.

JNM is published by the Society of Nuclear Medicine and Molecular Imaging (SNMMI), an international scientific and medical organization dedicated to advancing nuclear medicine and molecular imaging—precision medicine that allows diagnosis and treatment to be tailored to individual patients in order to achieve the best possible outcomes. For more information, visit www.snmmi.org.

Feedzy

Article: bioengineer.org

Continue Reading

Biotech

UCLA Researchers Develop Novel Microscopic Picoshell Particles

Published

on

Production of high-energy fats by microalgae may provide a sustainable, renewable energy source that can help tackle climate change. However, microalgae engineered to produce lipids rapidly usually grow slowly themselves, making it difficult to increase overall yields. 

Production of high-energy fats by microalgae may provide a sustainable, renewable energy source that can help tackle climate change. However, microalgae engineered to produce lipids rapidly usually grow slowly themselves, making it difficult to increase overall yields. 

UCLA bioengineers have created a new type of petri dish in the form of microscopic, permeable particles that can dramatically speed up research and development (R&D) timelines of biological products, such as fatty acids for biofuels. Dubbed PicoShells, the picoliter (trillionth of a liter), porous, hydrogel particles can enable more than one million individual cells to be compartmentalized, cultured in production-relevant environments, and selected based on growth and biomass accumulation traits using standard cell-processing equipment. 

Proceedings of the National Academy of Sciences recently published a study detailing how PicoShells work and their potential applications.

PicoShells consist of a hollow inner cavity where cells are encapsulated and a porous outer shell that allows for continuous solution exchange with the external environment so that nutrients, cell-communication molecules and cytotoxic cellular byproducts can transport freely in and out of the inner cavity. The shell also keeps the small groups of growing cells penned in, allowing researchers to study and compare their behaviors — what they do, how fast they grow, what they produce — to those of other groups inside various PicoShells. 

This new class of lab tool allows researchers to grow living, single-cell microorganisms — including algae, fungi and bacteria — under the same industrial-production conditions, such as in a bioreactor filled with wastewater or an outdoor cultivation pond. 

“PicoShells are like very tiny mesh balloons. The growing cells inside them are effectively fenced in but not sealed off,” said study leader Dino Di Carlo, UCLA’s Armond and Elena Hairapetian Professor in Engineering and Medicine at the UCLA Samueli School of Engineering. “With this new tool, we can now study the individual behaviors of millions of living cells in the relevant environment. This could shorten R&D-to-commercial production timelines for bioproducts from a few years to a few months. PicoShells could also be a valuable tool for fundamental biology studies.” 

PicoShells’ permeability can bring the lab to the industrial environment, allowing testing at a sectioned-off area of a working facility. Growth can occur more quickly and cell strains that perform well can be identified and selected for further screening. 

According to the researchers, another advantage of this new tool is that the analysis of millions of PicoShells is automated since they are also compatible with standard lab equipment used for high-volume cell processing.

Massive groups of cells, up to 10 million in one day, can be sorted and organized by certain characteristics. Continuous analysis could result in ideal sets of cells — ones that are already performing well in the environment with suitable temperature, nutrient composition and other properties that could be used in mass production — in just a few days rather than the several months it would take using current technologies.

The shells can be engineered to burst when the cells inside have divided and grown beyond their peak volume. Those free cells are still viable and can be recaptured for continued research or further selection. The researchers can also create shells with chemical groups that break down when exposed to biocompatible reagent, enabling a multifaceted approach to release selected cells.

“If we want to zero in on algae that are the best at producing biofuels, we can use PicoShells to organize, grow and process millions of single algal cells,” said lead author Mark van Zee, a bioengineering graduate student at UCLA Samueli. “And we can do that in machines that sort them using fluorescent tags that light up to signify fuel levels.”

Currently, cultivating and comparing such microorganisms are done mostly using traditional lab tools, such as microwell plates — cartons that hold several dozen small test tube-like volumes. However, these methods are slow and it is difficult to quantify their effectiveness because it can take weeks or months to grow large colonies for study. Other approaches, such as water-in-oil droplet emulsions, can be used to analyze cells in smaller volumes, but surrounding oils prevent the free exchange of medium into the water drops. Even cells or microorganisms that perform well in lab conditions may not do as well once they are placed in industrial environments, such as bioreactors or outdoor cultivation farms. As a result, cell strains that are developed in the lab often do not exhibit the same beneficial characteristic behavior when transferred to industrial production. 

Microwell plates also are limited in the number of experiments that can be performed, resulting in a great deal of trial and error in finding cell strains that work sufficiently well for mass production.

The researchers demonstrated the new tool by growing colonies of algae and yeast, comparing their growth and viability against other colonies grown in water-in-oil emulsions. For the algae, the team found that PicoShell colonies accumulated biomass rapidly while algae did not grow at all in water-in-oil emulsions. Similar results were found in their yeast experiments. By selecting the top growing algae in PicoShells, the researchers could increase the production of chlorophyll biomass by 8% after only a single cycle. 

The authors said PicoShells could offer a faster alternative to develop new algae and yeast strains, leading to improved biofuels, plastics, carbon-capture materials and even food products and alcoholic beverages. Further refinements to the technology, such as coating the shells with antibodies, could also lead to developing new types of protein-based medicines.

Di Carlo, van Zee and study co-author Joseph de Rutte Ph.D. ’20, a former member of Di Carlo’s research group, are named inventors on a patent application filed by the UCLA Technology Development Group.

The other UCLA authors on the paper are Rose Rumyan, Cayden Williamson, Trevor Burnes, Andrew Sonico Eugenio, Sara Badih, Dong-Hyun Lee and Maani Archang. Randor Radakovits from Synthetic Genomics of San Diego is also an author.

The study was supported by the Presidential Early Career Award for Scientists and Engineers and a planning award from the California NanoSystems Institute (CNSI) at UCLA.

Di Carlo holds faculty appointments in bioengineering, and mechanical and aerospace engineering at UCLA Samueli. He is a member of CNSI and the Jonsson Comprehensive Cancer Center at UCLA.

Read More

Source Here: bioengineer.org

Continue Reading

Trending

DXDD.com